16 Pin Cartridges for A6S Ultima x 10

• Short treatment time
• The precision of the procedure
• Solid performance
• The possibility of working in wired and wireless mode
• Automatic injection depth control
• Less pain and greater comfort for the patient
• Shorter convalescence time

Important: Microneedling cartridges must be sterilised before each use to ensure the treatment is safe and hygienic. It is essential to follow these steps carefully to ensure that the microneedling cartridges are properly sterilised. Here are the steps to sterilise microneedling cartridges:

1. First, ensure that you have all the necessary equipment for sterilisation; gloves, isopropyl alcohol solution (70% or above) and a clean container to hold the solution.
2. Put on your gloves to avoid contaminating the cartridges during the sterilisation process.
3. Check on your cartridge; ensure the needles are in perfect condition (i.e. not bending) and remove any debris.
4. Pour enough alcohol solution into the container and dip the cartridge needle into a sterilisation container, then soak for a couple of minutes.
5. If you have alcohol solution in a spray model, you can spray it towards the needle head of the cartridge.
6. Once the sterilisation is complete, allow the cartridge to air dry before using it.
7. Finally, your cartridge is ready for use.
   

How to Use

• To ensure there is no cross-contamination, cartridges must be sterilised before treatment.
• Double-cleanse (cleanse and repeat) then wipe the skin clean. Fully tie back your hair, away from your face. 
• Work in small areas and apply serum to each area before needling. This will help to ensure that the pen does not drag or pull on the skin. The recommended pattern to move the pen for best results is vertical, horizontal, and then diagonal in both directions. Using a light pressure and without dragging, repeat this motion over each area two times.

DO NOT USE

• On open wounds. 
• On active acne or irritated skin. 
• If irritation occurs.
• 16-pin cartridges are not suitable for hair loss

Please note: Ensure to use a new needle cartridge each time you microneedle. 

Usage Guidelines:

• For microneedling, It should be performed once every 4-6 weeks.
• Result may differ for each person, but the average initial result can be seen in the first 2 sessions.
• Safely dispose of the used cartridge after one treatment.

• Stimulate the skin’s healing response
• Increases the production of collagen and elastin
• Firmer Skin
• Reduces scars gradually
• Smooths out wrinkles

• 10 x 16 needle cartridges for the Dr. Pen A6S Microneedling Pen

Please speak with your doctor before purchasing any Dr. Pen products. The content on this site is not intended to substitute for the advice of a qualified physician, pharmacist, or other licensed health-care professional. The products may have additional information and instructions on or inside the packaging that you should carefully read and follow. Contact your health-care provider immediately if you suspect that you have a medical problem. This product may not have been evaluated by the Food and Drug Administration and is not intended to diagnose, treat, cure, or prevent any disease or health condition. For any concerns or questions, please contact your GP or dermatologist.